Govee RGBIC LED Strip Lights 32.8ft with Covers, Smart Lights Work with Alexa and Google Assistant, LED Diffuser Channel with LED Lights for Bedroom, Skirting Lines, Studio, Cabinet

AWESOME PRODUCT! – Installation Notes
We recently bought Govee’s LED strip lights with the diffuser channel (the frosted plastic cover inside the plastic rail), and it’s AWESOME!!!!. We’ve had great experiences with Govee products in the past, and this felt like the best option on the market. Huge kudos to Govee’s engineers for how well thought out this system is, especially the way the LED strips clip cleanly into the rail and providing precut 45 degree rail pieces (and corners) for the corners (details below).We installed the lights along the ceiling line of a room. To fit our space, we purchased both the 16’ and 32’ kits. In hindsight, we were very glad we chose the longer 16’ option instead of the 9’. Having extra pieces gave us peace of mind in case something broke or needed reworking during installation.Differences between the 16’ and 32’ kits:They use the same technology, but differ in length and model number. The 16’ kit currently has access (through the app) to Govee’s “Share Spaces” feature, which lets you browse and “User community” created lighting setups. We also noticed the 16’ kit came with longer adhesive strips, which in our opinion were better (see attached photo).A few helpful installation notes:• Pick a corner near power and start there. Spend a little time planning the layout.• The YouTube channel “ChrisMaherDIY” was incredibly helpful for seeing the unboxing and basic installation before starting.• Take time to familiarize yourself with everything in the box before you begin. The video above helps identify what each piece is.• For corners, Govee includes 8 pre-cut 45° rails per box for corners (4 inner and 4 outer bends).• Each kit (both 16’ and 32’) includes 8 corner attachments for the frosted plastic covers. (4 inner and 4 outer bends).• Practice sliding the frosted cover into the rail before you’re up on a ladder. It’s not hard, but it’s annoying to figure out overhead.• While there’s no physical way to connect the 16’ and 32’ kits together, if you create a “room” in the app and add both sets, they sync automatically. This was a pleasant surprise.• If you’re installing right along the ceiling line and have textured or popcorn ceilings, leave a tiny gap between the ceiling and the rail. This mainly affects the start and end caps.• Cutting pieces: Regular scissors and wire cutters don’t work. Ideally, use a miter saw or a Dremel. If you don’t have those (I didn’t), straight tin snips (yellow handle) or “Fiskars Pro PowerArc Shop Shears” work. I used tin snips for both the rails and frosted plastic. The cuts lines weren’t perfect, but they worked. In hindsight, the Fiskars shears would’ve given cleaner, straighter cuts.• Adhesion: In some spots, the rails didn’t stick well, even after cleaning the wall. The spare pieces with longer adhesive helped, but a few sections needed extra support. “Scotch Removable Clear Double-Sided Mounting Squares” worked well with a little trimming of the tape.• If the rails aren’t perfectly straight, don’t stress. Once the frosted cover is installed, it hides and straightens minor imperfections, especially when spanning two rail pieces.• When cutting the frosted covers, measure twice and cut once. I ended up with a few tiny gaps that were barely noticeable (mostly because I knew where to look). This was due to using tin snips and not getting perfectly straight cuts.• This install is definitely easier with two people. One person can hold, align, or slide pieces while the other measures, cuts, or presses the rails in place. It saves time and frustration, especially around corners.• If you have furniture that’s hard to move and you’re leaning awkwardly to deal with corners: instead of trying to custom-cut the frosted plastic right there, slide the full-length cover pieces toward the corner. That way, the section that needs the custom cut ends up in front of a more accessible part of the wall, making measuring and cutting much easier.• The power button/control module is about 18” from the end of the LED strip. To keep the cable looking clean against the wall (or in a corner, closer to a power outlet in our case), we used a simple cord hider, which made a big visual difference.Overall, this is an AWESOME product with thoughtful design. Installation takes some patience (took us about 3-4 hours to do a 12’x10’ room), but the end result is absolutely worth it. Hopefully these tips help make your install smoother than ours.

These Govee RGBIC strip lights are awesome. Super bright, tons of color options, and the covers make them look really clean and professional once installed. The app is easy to use and the effects are fun to play with. Adhesive stuck well too. Great way to upgrade a room without much effort.

Such an excellent kit. Govee is definitely consumer oriented and easy to install. The app is easy to use and has more features than one could dream of.I gave it 4 stars because it does require cutting to custom fit and have tidy ends. I have fluted slat walls and these do not fit in between the panels. Also, the system is not symmetrical.. what that means is there are sides that show less light and a back side that is opaque. The corner pieces appear to be designed to allow you to make 90 degree angles against wall edges and corners only… you can’t go up the middle of the wall without exposing one of the asymmetric sides.

As with all other Govee products I’ve tried, these are very high quality and work great. I have them synched up to all my other Govee lights which are synched up to my PC screen, making my whole gaming room very immersive. I just realized this sounds like an ad, but I don’t even care. lol