Led Strip Lights 32.8ft Warm White Dimmable Led Light Strip Flexible Rope Lights Kits with 12v Etl Power Supply, Adhesive Clips, Dimmer Switch and Connectors for Indoor Decor
Product description
MULTI-SCENES LIGHT
TV Light
Desk Light
Wardrobe Light
Unique Designed Dimmer: The smart led strip lights works with a unique designed dimmer, long press its middle button to adjust light brightness (2800-3000k), short press to turn on or off. On-green light, off-orange light
Bright 12v Led Light Strip: Premium 600pcs leds chips will offer 1641 lumen to give off super bright light to light up your whole room, bedroom, living room, kitchen, mirror, tv, under counter, wardrobe and office, and it also can be mood light
Self-adhesive Foam Tape and Adhesive Clips with Screws: This led strip lighting backside with custom foam tape with strong adhesive and elastic features. As time goes by, foam tape will be more and more sticky.And it also comes with adhesive clips and screws for fixing firmly
Cuttable and Linkable: Every 3 leds as a unit is with a cutting mark, please cut it according to its cutting mark. And the 32.8 feet led rope lights also comes with connectors for linking use
Safe to Use: The led ribbon lights work in 12v low voltage with a ETL and FCC listed power adapter with short circuit protection, and the strip lights certificated by SGS with energy-saving, low heat, touchable and long lifetime features. You can use it safely.
10 reviews for Led Strip Lights 32.8ft Warm White Dimmable Led Light Strip Flexible Rope Lights Kits with 12v Etl Power Supply, Adhesive Clips, Dimmer Switch and Connectors for Indoor Decor
Add a review
$0.87
Andy –
Easy to install, great lighting
I was looking for a hidden lighting solution for my newly renovated pantry, and didn’t want a battery-powered solution. Everything I’d researched indicated that at best the batteries would last 2-5 weeks, and I wasn’t interested in yet another charging scenario. While my pantry doesn’t have an internal electrical outlet, it is positioned next to the refrigerator, which obviously does, and separated by an internal, uninsulated 8″ drywall. A small hole through the wall, and the purchase of an additional 10ft 12VDC extension cable (also via AMZN), and I was in business.The pantry is not particularly large – it’s a step-in that is 2 doors wide, with 6 custom-made solid oak shelves that are adjustable in height. With 6 shelves that are 16.25″ deep, you really want to have a lighting solution that shines into the shelves at all levels, so an LED strip light sounded like the best solution to me, which meant that I wanted a light that would be positioned at the door, facing backwards into the pantry. What initially attracted me to this one was (a) the length of the two strips (16.4 feet or 5 meters each), (b) the packaging that included the ability to cut and join the strips with supplied connectors, making it easy to put strips around 90 degree corners such as those found on the perimeter of a door frame (and shown in the picture), (c) the fact that the larger one comes with 2 strips, and the controller has an adapter to supply power to both strips – this was crucial because my installation required that the power control button be mounted about 4 feet above the floor, and rather than buy a 2nd power extension cable to run power to a connector on the floor (because the included cable wasn’t long enough) I opted to cut a length from the 2nd strip and simply use that, and finally (d) the price – it’s really hard to beat $22 for this setup.The light temperature of 6500k is perfect for the pantry – yeah, it can be dimmed, but I wasn’t super interested in that. The amount of light shed is also just right – I opted for the “white” as opposed to “warm white” or “yellow” color.Installation of the strip is super simple – to get around the 90 degree corners, you’re going to want to cut it, and then join it with the wired connectors (of which 2 are supplied). Since the strip comes with double-sided tape attached to it, you need to carefully peel off the double-sided tape from about 3mm at the end of the strip, insert it into the (opened) connector, underneath the two lip guides, and underneath the two contact points. It doesn’t matter if you use black as positive and red as negative or vice-versa, all that is required is that it is an inline connection with no wire cross-over. Once the strip is snug under the connector contact points, you can close the connector clip. See one of the pictures for the connected strip. Since the cabling itself can’t be seen unless you really stick your head into the pantry I did not opt to cut it to length and secure it carefully – I may do that in future, but since nobody can actually see it …Do your measurement, cutting and joining *before* you attach the strips to their final location. The adhesive sticks firmly, and doesn’t want to come off once you’ve secured it in place. Make sure you cut *only* at the indicated contact points (little copper connectors), and cut *exactly* where the scissor marks indicate. I would recommend installing the switch to its correct place before you connect and install the strips, because it may be your biggest limiting factor. At a minimum, mock it all out first.In summary, this is a super cheap, 12VDC powered LED light strip for those who *don’t* want the hassle of a battery. The dimmable, 6000-6500K light strip that is perfect for making a neat and hidden lighting solution in many different scenarios, and was perfect for my requirements. The only thing that we don’t yet know is longevity. Typically LEDs last for 10s of thousands of hours, and I have no reason to believe that this will not do the same. Five stars all around.
craftylady 58 –
Beautiful under mount kitchen cabinet lights
When I finally got these lights (delayed!!), they appear to be good quality, ambiance is beautiful, price was good. If they are as durable as my previous set I will be a happy customer.
Cynthia A. Lees –
Shows off my glassware!
Super easy to install. I used in a China cabinet and am very pleased. Since I have glass doors I didn’t want batteries or motion detection so I pulled through a small opening in back. Awesome! Adhesive working just right do no issues there. Only complaint is it really doesn’t dim effectively.
Gray Rider –
VERY BRIGHT, BUT WARM WHITE?
Wanted to install brighter LED lights to “uplight” the crown moulding around a cathedral ceiling. They are definetely bright, and the photo attached is set at the lowest setting. I needed about 80′ of lights to completely go around the room, so I ordered two sets. One thing to note is that you cannot connect the sets “in series.” So each set had to connect to a power source. Another point to note is that the enclosed double-side tape pads did not stick to the inside of my plastic moulding (I didn’t bother removing the covering from the back of the lights, which are “sticky” themselves.) But to be fair, I had some 3M double sided adhesive pads, and I ended stapling those pads (not the LED strips) to the inside of the moulding. Also note the dimmer is wired, so in my installation, once it is set, that’s it (unless I bring out a ladder!) My minor complaint, is that although both boxes are clearly labeled as “Warm White”, I thought the color output is more like “Daylight.” Nonetheless, other than the enclosed “sticky pads”, thought the components are good quality – and of course, the lights themselves are very bright.
William Bass –
Perfect for my retro games display
Light strips worked perfect for what I needed them for. Had to return the first set as I didn’t like the hue, but the warm white is perfect for my display case. Cleaned the surface and then ran the strips inside the case. They bend good enough at the corners to not break. The two separate strips worked perfect for me to run out the back of the display case and the button remote has sticky tape so I fixed it to the back when I can just reach behind to turn on and it’s hidden! Love it and looks awesome 😎.
Shannon –
Easy installation and very bright!
These were easy to put up and are very bright!!
Dennis –
Works great
Used in my gun safe. Absolutely great.
art hansher –
The tape is easily cut into a number of pieces. I did also buy a feed kit to terminate the ends. Very bright, I have it dimmed to the lowest level about 10%. The tape is on a smartplug to turn it on and off on a schedule. I have also used the tape in table lamps, salt light, that did require additional 12v dc power supplies. The 16 feet went a long way.
Cher –
These light are exactly what I was looking for in our recroom
Gary ONG –
Very easy to connect and fix up. However the dimmer does not work.